

 
WPLL Championships 2010 Junior League District 13 Champions Majors Baseball District 13 Champions Majors Softball District 13 Champions 9-10 Baseball District 13 Champions 9-10 Softball District 13 Champions
2009
Junior League District 13 Champions
9-10 Softball District 13 Champions
2008
Junior League District 13 Champions
Majors Softball District 13 Champions
2007
Junior League District 13 Champions
Majors Baseball District 13 Champions
2005
Junior League District 13 Champions |
Little League Bat Rule
New Bat Rule
NOTICE TO PARENTS, PLAYERS AND LEAGUES: IF YOU ARE CONSIDERING THE PURCHASE OF A NEW COMPOSITE METAL BAT FOR USE IN LITTLE LEAGUE BASEBALL (Major Division and below), BE SURE THAT THE BAT YOU ARE PURCHASING HAS THIS MARKING: BPF 1.15 ON THE BARREL OR HANDLE OF THE BAT. IF NOT, IT WILL NOT BE ALLOWED FOR PLAY IN LITTLE LEAGUE GAMES.
Little League officials are aware that there are bats for sale in stores, online or that may have already been purchased that are Little League approved, but do not have the required bat performance standard (BPF) markings. In fact, some of the bats on the Little League approved bat list may not carry the required BPF 1.15 marking on the bat, depending on when they were manufactured and licensed. Currently manufacturers are conducting an inventory and re-testing of all approved bats. The results of this study / retesting is to be finished by March 31, 2009. We are building a list of certain bats that are approved, but do not have the BPF marking due to special circumstances. For these bats, we are extending eligibility for play until December 31, 2009. As we are made aware of bats that meet our criteria for this extension, we will add them to the list. Please check this list regularly for updates. HOWEVER, ONLY BATS WITH THE BPF 1.15 MARKING AND THE BATS ON THIS LIST WILL BE ALLOWED FOR PLAY IN 2009.
Bats with the special exception include the following:
Adidas Vanquish Blue design (There is a newer model of this bat, also named the Vanquish and it has copper and black markings. It contains the proper labeling and therefore is not subject to the one-year rule).
DeMarini - Black Coyote, Rogue, Distance, Rumble, Tengu, Mach 10, Patriot
Easton - LZ-810, LZ-800, Stealth Optiflex LST 1,
Louisville Slugger - YB31
NIKE - Areo
Statement Regarding Bats in Junior League Baseball
Beginning with the 2009 season, baseball bats with a diameter of 2-5/8 (two-and-five-eighths) inches are now the standard for all teenage baseball divisions (Junior, Senior and Big League).
Baseball bats with a diameter of 2-3/4 (two-and-three-fourths) inches are no longer permitted for use in the Junior League Division of Baseball. Previously, these bats could be used in Juniors, but not in Senior or Big League.
Background
A committee at USA Baseball is in the process of developing a standard for bats used in the Junior League Division. Currently, there is no standard in place as there is for bats in Little League Baseball (Majors) and below, and for bats used in Senior League and Big League.
(USA Baseball is the governing body for amateur baseball in the U.S. Little League Baseball is a member of USA Baseball.)
This step taken by Little League, and to be taken by other youth baseball organizations in the coming year or two, is a first step in that process and a way to prepare for the new standard. Eventually, for the Junior League age group, only bats with a diameter of 2-5/8 (two-and-five-eighths) inches will be manufactured to meet the new standard when it is ready for implementation.
(Note: The standard for bats in the Little League Baseball [Majors] Division and below is the Bat Performance Factor [BPF]. This is a measure of a non-wood bat's performance relative to wooden bats.)
In the Senior and Big League Divisions, the standard is the Ball Exit Speed Ratio (BESR), with its "minus-3" requirement. The overall weight (in ounces) of a bat can be no more than three ounces below the overall length (in inches) of the bat. This mandate remains in effect in Senior and Big League Baseball divisions, but is not a requirement in Junior Baseball.
Additional Information for Little League Baseball (Majors) and Below
In effect for the 2009 season is the requirement that all non-wood bats used in Little League Baseball (Majors) Divisions and below shall be printed with a BPF of 1.15 or less.
This stipulation has been included in the Official Rules and Regulations for the past few years, leading up to 2009, so that leagues, parents, and bat manufacturers could prepare for it.
Most non-wood bats manufactured over the past several years for the age groups involved in Little League Baseball (Majors) and below have been permanently imprinted with the BPF. In fact, very few bats sold today with a diameter of 2-1/4 (two and one-quarter) inches are not printed with the BPF rating.
So, starting with the 2009 season, bats printed with a BPF higher than 1.15, or without a BPF printed (or not legible) on the bat, are not permitted in these divisions.
Rule 1.10
The bat must be a baseball bat which meets Little League specifications and standards as noted in this rule. It shall be a smooth, rounded stick and made of wood or of material and color tested and proved acceptable to Little League standard. It shall not be more than thirty-three (33) inches, (34 inches for Juniors; 36 inches for Big League, 2 3/4 inches for Junior, and 2 3/4 for wood-2 5/8 non-wood for Senior and Big League) in diameter, and if wood, not less than fifteen-sixteenth (15/16 inches in diameter (7/8 inch for bats less than 30") at its smallest part. Bats may be taped or fitted with a sleeve for a distance not exceeding sixteen (16) inches (18 inches for Junior/Senior/Big League Baseball) from the small end. Senior/Big League baseball a bat shall not weigh, numerically, more than three ounces less than the length (in inches) of the bat (e.g., a 33-inch-long bat cannot be less than 30 ounces).
- Note 1 ~ The traditional batting donut is not permissible.
- Note 2 ~ The bat may carry the mark "Little League Tee Ball"
- Note 3 ~ Beginning with the 2009 season, non-wood bats used in divisions of Little League (league age 12 years old and younger) shall be printed with a BPF (Bat Performance Factor) of 1.15 or less. Senior and Big League non-wood bats shall meet the BESR (Bat Exit Speed Ratio) performance stand, and such bats shall be printed with a permanent certification mark.
- Note 4 ~ Non-wood bats may develop dents from time to time. Bats that cannot pass through the approved Little League bat ring for the appropriate division must be removed from play. The 2 1/4 inch bat ring must be used for bats in al softball divisions, and the Tee Ball, Minor League and Little League Baseball divisions of baseball. The 2 3/4 inch bat ring must be used for bats in the Junior League. The 2 5/8 bat ring must be used for bats in the Senior League and Big League Divisions of baseball.
|
Picture of the Day |
|
|
Please submit pictures to:
webmaster |
| |
Help Support WPLL
WPLL Sponsor Paikuli & Associates an insurance company in Medical Lake has offered to donate $25.00 for every insurance policy purchased or transferred to them when WPLL is mentioned... Program Details |
Next Board Meeting
Wednesday, April 14th, 2010 @ 6:30 CHS
He Is Just a Little Boy
He stands at the plate with his heart pounding fast.
The bases are loaded, the die has been cast.
Mom and Dad cannot help him, he stand all alone.
A hit at this moment would send the team home.
The ball meets the plate, he swings and he misses.
There's a groan from the crowd, with some boos and hisses.
A thoughtless voice cries, "Strike out the bum"
Tears fill his eyes, the game's no longer fun.
So open your heart and give him a break,
For it's moments like this, a man you can make.
Please keep this in mind, when you hear someone forget,
he is just a little boy, and not a man yet.
|